William C.: My oh my how far this industry has come in such a short time. When the
ProTank first came out I was pretty excited, especially after seeing all
the good reviews it had. Then I got one & was really let down, very
unimpressive IMHO, even at that time. The vapor was OK but the flavor (IMO)
was so muted, a total deal breaker for me. I ended up giving it away about
a week later when I got my IBTank & Boge 510 cartos. Anyway, it was nice
BlessTheAutumn: Push the shaft back in
andrew buckner: even though they come with a "extended length " nose on the coils that come
with it the standard h-2 coils with a shorter nose will also fit with no
goded03: I just ordered a provari mini v2.5. I'm a beginner and I'm not sure which
tanks I should buy.. I'm not a smoker so I'll be using nicotin-free and low
nicotine juices. I want to get huge vapours off of this but I dont wanna
struggle with rebuildable stuff yet. Should I buy aspire nautilus? Does it
really give burnt taste when you use high VG liquids? What other tanks
should I buy to get big clouds and good taste? Sorry for the question bomb
but I wanna order the tanks before receiving my provari. Thank you…
Julie Bastian: Thank you for the helpful tutorials!!
Tyler Boell: Do you have a video where you show how to remove the extra wick in the
coils kanger uses?
chosadei1: $18...Geez I paid $35 and didn't even get the card with the resistances and
voltages. It seems again the battery is more important than the tank, I
don't get anywhere near that amount of vapor. Smok variable voltage 3.2 -
BrianTheBoss16: I love you videos. Very informative and have helped me alot.
With the protank and evod/t3s all use the same heads. what i do and it
works great is i remove the silica wick and replace it with cotton not very
hard to do, and i find it gives me a better tasting vape and more vapor. i
can make the wick longer or shorter depending on the pg/vg ratio. i know i
am posting this very late as they now have the protank 3 but just thought
id shar this with you
Kipp Christopher: hey how often do you have to repace the coil in the tank? if i smoke it for
about 4 hours a day total?
SubstituteSoulReaper: Dear lord...... I prayed forty three dollars, after tax, for this at my
usual smoke shop... I feel freaking robbed, man... 😟
etrain989: are those just regular candle wicks? or is it something different? are they
washable/reuseable for other eliquids?
myrandom: Fixed the airflow problem....I think
mistermatsuda: Because to took out the extra wick from the head it left a gap where your
tank was exposed to the wire. That's why you had all that black stuff in
the tank. That wick acts almost like a filter, it needs to be there to
protect your tank liquid from the coil.
bite my vape: sorry pete!!!! called you phil in my ecblend review you are the vape king
and get alot of info and advice from you!!! VAPE ON!!!!
Arthur Red: Gnurling, uhhh milling?
GRiZLOC: I really love the Protank. All the way from Protank 1 to Protank 3. I love
the way its so easy to change the coils on the Protank. Most people even
rebuild the coils but thats something I dont. I just buy 5 coils for €6 and
Arthur Red: Been vaping for a while now, and my biggest put off is how douchey people
get with tweeking thier heads and nodding for no reason whatsoever while
Jon Babila: Thanks for an excellent review Phil. Just bought mines after work today and
lovin it. I own the Vivi nova and iclear30 & iclear16. Guess I'll be
cleaning them out and moth balling them for back up. My brother just bought
me the Odyssey which I think works very well but is taking to this kanger
Pro tank a little better. Ive been vaping for almost a year now (cigarette
free) and have no regrets. Ive been following your reviews since I started
vaping. Again thank you Bruddahjon Washington State.
terry cronin: Kanger Protank is the biggest piece of crap I've wasted money on. It leaks
constantly. It will empty a full tank of juice all over you in a matter of
minutes. Plus you will end up with a mouthfull of liquid. I purchased a
second Kanger as I thought the first one was just faulty but the second was
just as bad.I'm not new to vaping I've had many types and brands of e
cigarette but the Kanger is by far the worst one you can buy. I can not
understand why people are giving it such great reviews.Avoid
Jovy Macaspac: The top of my protank broke off. Had to use krazy glue to bond it to the
Preston Morris: litecigusa Just picked up some from them. Pretty cheap and you get them fast
wayne toombs: I'd start at 7.5watts and adjust according to your taste
mbrooky: i've noticed that when the bottom part that is knurled holding the
head/coil is on too tight it's doesn't hit...loosen it a small turn then
try hitting it again
ryan wright: Mine leaked. It started not working when I messed up and thought I was
unscrewing the bottom when it was actually the tank. So I switched the
head. Didn't get any pull on the other head they provided. How can I fix
the draw or pull on the new head?
Andrew Ames: The Kanger ProTank is way too finicky and unreliable. You have to take the
top wick out so that it doesn't taste horribly burnt. However, when you do
this, it floods if you aren't using a thick juice. Even if you take the top
wick out and use the optimal PG/VG mix it will still start to taste burnt
after a few days. So you have to wash it and dry burn the coil. If you love
having to mess around with something to make it work as intended then the
ProTank is for you. The ProTank is way overrated.
GRiZLOC: I really love to vape my joyetech e-liquid with my Smoktech SID on the
ProTank 1 and also ProTank 2. I love the Kanger ProTanks. I highly
Zsavage1: Great video and this is deff the tank I am getting.. must be Pyrex the
plastic tanks are junk in my opinion to many leaking problems with them ...
thanks again for sharing with us......... Thumbs up!!
Therionangel: I've managed to limit the air flow for the Protank on my Vamo by trimming a
ring off of one of the silicone sleeves the coils arrive in and placing it
around the outside of the 510 connection threads. On the Vamo, and a number
of other mods, there are 4 slots cut out around the treads for airflow. The
cut sleeve "ring" from the coil sleeve should sit flush to the top of these
slots. The result provides a more resistant draw that provides a warmer,
denser vape that's more flavorful.
Switchback Outdoors: Why remove the top wick?
Robert Mata: First off, great review, second off, what do you do for work, i notice the
audio lab behind you, the record to the left and picture to the right, Post
production work? Sorry, thats completely unrelated, but great video. Just
bought mine and watched this to see if there was anything i needed to do
before first use.
Error lVlacro: I feel like I blow back into the tank when I try
mmanda515: I covered 1 of 'em w/ my finger for a short time- then ended up just
covering 2/4 of them with a tiny piece of transparent scotch-tape. Still
get kind of a muted flavor compared to, say... VapeOnly BCCs or iClear 16s,
which I love~ tho it's definitely MUCH better. Not to mention WAY less of
an airy draw too! Sure, it's kinda just a quick rig job.. but for now, you
can't see it +.... whatever works, right? =) Hope that helps.
Jovy Macaspac: The flavor wick? To increase the flow of eliquids to the coil. Decreasing
the density of the wicks on the notch somehow increases eliquid flow to the
Bryan Kerr: Just got one today at Goodejuice. It works great!
Jason Myers: feta cheese is the best
TheGreenCheekConure: I have the pt2. If I get a burnt or plastic taste, what does that mean?
Morpheus Maser: EVC with a code I found on a forum. 20offevic
Oak Flower: i just ordered a jwrap for my vamo the finish where i put my fingers has
completely come off straight brass so im getting a grey carbon fibre wrap
to mach my rda, vivi nova, and eternity
Bryan Kerr: KangerTech has a Pro Tank 2 coming out. Looks pretty nice.
Andrew Ames: Smash it with a hammer then buy an iClear or cartomizer. It floods because
you have to use a very thick juice if you take out the top wick. I can only
get about two days of decent tasting vape out of mine as well. That's
because the coil gets covered in crud very rapidly. This will probably be
an issue with all BCCs. I have no idea why the ProTank is so highly rated.
Maybe some people don't notice the burnt flavor or they don't mind cleaning
and dry burning it every three to four days.
thedamion: Alternatively you can just pinch out the wick when it's soaked with some
juice, I did that without removing the post. :D
Stevenz Relos: Will this work with the ego c twist without triggering the safety feature
of it not giving the full volt charge that you want it to? ie if i wanted
to use it at 4.8 will it be able to use all of the 4.8?
fabforceone: It makes me laugh every time I hear the intro of your vids...Sounds like or
reminds me of the Obama Phone Lady...lol
salceci: Its ok to be a fan boy if the product stands behind you. I vape alot amd it
gets very tiring having to stop what im doing take the tank apart cleaning
it up making sure every thing is dry and tight before i put it back on my
mod. For a month my 6month my kanger had me flooding and it was pissing me
off. The pro tank 2 comes and it gurgles every time my juice gets low.
Doesnt matter what vg/pg mix i use. At first it didnt do that but after a
good amount of usage its wearing out. Im just over it.
Patrick Robinson: with that skirt/thread-cover it comes with it makes a really cool little
handful with an ego C
Addicted2Logic: I'd like to know how the vape quality of the Kanger ProTank is different
from the Kanger T3S cartomizer? Don't they use the same replaceable
atomizers? Other then that, isn't it just a difference in size, looks,
durability, etc? Thanks!
Bryan Kano: my understanding is that the kanger protank is constructed from more
durable materials including better (not sure about specs) metal and a pyrex
type glass. other it also has larger airflow due to grooves milled into the