How To Clean And Dry Burn A Clearomizer




What do you think about this video?

atari 2600: no matter how long i do it for it doesnt go red...

DarkRoking: When I connect the battery with the clearomizer my little led button on the battery it starts flickering and the battery stops plz help

Shane Austin: Name copied from outlaw dipper. I'm done

dumptonpark: Thanks, My wife has been going on at me to clean hers.so now I will.

AppealPlay: Very useful video. Thanks!

Ivan mc cormack: brilliant vid,you have saved me 5euro a week,thanks man

Alex Kweifio-Okai: Hmm mine tastes like burn toast now!

Bryan Rupert: your intro is annoying....

zazta69: Vaper from Finland gives big thanks for the video!

MasonGrayDrums 87: Mine tastes burnt now. Please tell me this will go away

jonnychadootz: This is a good method to clean out wick-less/steel mesh filters. Personally I prefer to take mesh/tube off the ignitor/battery the dunk it in wate (remove rubber piece as well) Let it sit for in water for a min or so then flick out the water and repeat multiple times. After that, I dry everything as well as possible, screw everything back together (minus the mouthpiece and rubber top seal) then begin the clear/dry burn process as described in the vid. This works for me very well and brings new life back to filter. Much cleaner vape and taste. Thank you for vid, it helped alot. 

Neil B: Thanks been doing it wrong for 8 months 

andthereisntone: +outlaw vaper Hi, how about for clearomizers with replaceable heads? Thanks.

martin butcher: I watch your video follow your instructions I was cleaning mine out but I wasn't dry burning Since i dry fired my coils to burn the gunk off it has doubled my vapor production Big thanks

HEAD3455: harmonymartins people before yu jump to this site beware of small print remember read the small print nothing is free they have your card# and they can start pulling money out of it if yu don't like it or return it anyway it happenedto me so be care full nutting for 5 bucks its a bait and switch!!!!!

vietpong: I take apart my clearomiser, run everything through a cold tap, dry each piece with a hair dryer,leave to stand to cool down, n start filling.

Elayna Spivey: When I dry burn it the smoke smells burnt..... is that okay? I think I'm doing something wrong......

HampeTheGamer 〈3: omg! mine tastes like burn water or something!!! i exacly like u did! :( plzzz help anyone?

codesta100: The juice is water soluble, so is there really a need to dry burn? I would think that'd do more harm than good.

WILLIAM OTOOLE: I am using the Vivid range of e-cigs and My wicks have all but gone... I have been looking for something to show me how to clean it out.... and I found you.. Just giving it a few minutes to dry while the battery charges for a while then it should be good to go... thanks !

jarred togo: what if its whickless 

Kevin M: Thanks dude you're awesome!

Tom Wright: Very helpful, thanks for that. Using this method, how long would you estimate you can keep this type of clearomizer in use?

angela reynolds: thank you !! Worked perfect , i can now vapor without leakage , yes it smelt of burnt toast when the coil started to go red but once filled it is perfect & did not taste the way it smelled ! :D & all the gunk is not off my wick ! :D cheers :P 

allentig: you do know that the coil touches the wick ? you do know that once you burn the wick, you will never be able to use that wick again without getting a burnt taste. i have no idea who thought this was a good idea and who spread these videos, but this is 100% exactly WHAT YOU DONT WANT TO DO, PERIOD, NO ROOM FOR ARGUMENTS.

Zarina S. Bibi: I did this by myself and of course was very nervous, and it did smell like burnt toast but in time all was well. Also I did not use a battery for drying, just shook it and let it vapor out the moisture as if you are smoking it- hope this helped some of you out there

dylan sorrell: Mine tastes skunky now did I do something wrong?

Mark Cadle: Geez... a whole minute of introduction added to the beginning? I thought a movie would follow after that trailer.

Laz X: 55 second intro? plz

Glen Hester: thank you i was wondering how the heck i was going to clean my clearomizers. hopefully i'll get an nautilus tank soon but for now this is a great help.

Driamer: This is for people who are saying that they are getting a burnt taste after following the instructions on the video. I followed this tutorial because the flavor I was getting off my clearo was off, and after this tutorial it was HORRIBLE. It tasted like mixture of burnt toast, melted plastic and cat urine (at least how I imagine it would taste). So I did a new clean that fixed the problem. Here's the steps: - Rinse out the tank - Remove the silicon seal from the top. I used a paper clip that I put in the hole and by twisting a bit, I got it out. I noticed burnt gunk on the wick. - Rinse out the tank so the wick gets cleaned. (the wick might get detached depending on the model and tightness of the connection. If so, use tweezers to get it back.) - Use a blow dryer to dry the tank. - Dry burn the wick like in the video. But now you can see what's happening to the wick and coil much better. Every now and then blow out the gunk. - When you see coil glowing clearly, you're done. - Rinse out the clearo again. -Don't skip this part- - Re-assemble. This fixed the problem for me completely. Which is good because this was my only clearo I have on me at the moment, and getting a new one takes like a week here.

James John Murray: how Would you dry burn a T3s? no removable drip tip on that, thanks 

indieopium: Thank you so much for this guide. Three of my clearomizers in a row had a faint taste of soap when I used them. And I thought it a shame to throw them out, so I found your guide, and it was so useful. Naturally, I did it wrong the first time and burned the first coil, but I found that it works for me to dry burn until the moment you feel the part with the "nipple" is warm, fill some liquid in and just gently puff on it until I have normal vapor. It takes 5-10 minutes for the taste and vapor to come back but it works - and the soapy taste is finally gone! On top of that, I thought one of my clearomizers was dead for sure, since it had a very burnt taste. That's all gone now. Thank you for this guide. It has been so helpful and has already saved me money and will save me even more in the future

Jewish Kartel: THANK YOU OUTLAW. (O___O)

Exploding Crow: assuming the tast of burnt plastic/whatever eventually goes away, this really helped!! i knew there was something wrong with my clearomizer, as i didn't seem to be getting any vapor even at full charge. i went and bought 2 new clearomizers, not realizing they didn't work with my battery, i really didn't want to walk all the back to the store and then back again (i'm out of shape)(also it started raining today). after searching for (literally) hours for a solution, i came across this video and now it seems all is well. thanks a lot man!!

Wayne Thompson: Good instructions, I could have passed on the beginning though lol. My question is does this need cleaned each time it's refilled from full to empty? I liked your video here on youtube. Also where can the nicotine be bought on-line at a good price? I see you posted a coupon but whats that link?

emmet marron: thanks for the video mate, would you reccomend cleaning before every refill ? thanks

Elijah Edwards: I filled up my tank but I don't get any vape for some reason help

Kadje Shutt: Great tutorial thanks!

1990raleigh: 80 proof vodka works loads better the alcahol kills any germ build up and cleans the wicks better to get any dried up e-liquid out

Eric Agena: Videos are good...but that intro imo is way way too long

Korban Dallas: THANK U FOR THIS U GET A SUB

Dean P: Perfect, simple.. straight to the point. Thanks.

Tina Tuttle: Thank you for this video. Worked perfectly.

anes pizzaguy: People who has the Aspire bdc, DON'T dry burn... It will taste like burnt after and it won't go away!!! 

Jennifer Lee: So far this was the best how to video I have found. Thank you for being so clear about everything. This is my first vaporizing ecig, so I was a bit unclear as to how to clean it. This worked beautifully

StuBotNYC: Worked on my over filled Nano, I used two second bursts on my eGo 1100 battery. Dried out the tank with a small long swatch of a bounty napkin, I'd use a can of dust off next time. I filled it, then after about ten dry hits with no power, and twenty hits with, it performs as new. 

MickyWinx: My rubber bit at the top snapped off..... Can I replace it or do I have to get a whole new top bit??

PonyPower71: Worked like a champ. Thank you sir!!!

cataxo444: thank you so much for this video, i only have one clearomizer and this helped alot

Vet: When I graduated High School, all I wanted to do was kick back and relax without having to do any homework. But I realized I have no money to do anything fun. So I went to a San Francisco Vet School to get trained to make money. But seeing your videos, I am gonna be an internet marketer on the side. Let me know if you have any tips. Thanks.
Rating:
How to clean and dry burn a clearomizer 4.9 out of 5

Shared by Others

How to clean and dry burn a clearomizer
How to clean and dry burn a clearomizer
Cleaning / Dry Burning iClear 16 Clearomizer / Tank
Cleaning / Dry Burning iClear 16 Clearomizer / Tank
How to Clean & Dry Burn Kanger EVOD & MT3's
How to Clean & Dry Burn Kanger EVOD & MT3's
Real Reviews: How I dry burn my Vivi heads
Real Reviews: How I dry burn my Vivi heads
How to clean a CE4 a.k.a. Vision Ego Clearomizer a.k.a. Stardust / CE5
How to clean a CE4 a.k.a. Vision Ego Clearomizer a.k.a. Stardust / CE5
Innokin iclear 30 Review and Cleaning
Innokin iclear 30 Review and Cleaning
How to clean CE5 Clearomizers
How to clean CE5 Clearomizers
How to Clean a Clearomizer (Stardust / CE5)
How to Clean a Clearomizer (Stardust / CE5)
Foos electronic cigarette Clearomizer Maintenance Dry Burn
Foos electronic cigarette Clearomizer Maintenance Dry Burn
Vapor Lady Lounge Kanger eVod. Protank. MT3. Cleaning and Burning The Atomizer for Better Vaping
Vapor Lady Lounge Kanger eVod. Protank. MT3. Cleaning and Burning The Atomizer for Better Vaping
Cleaning a burned tasting clearomizer for E-Cig
Cleaning a burned tasting clearomizer for E-Cig
ECCR Xtra: Clearomizer Tank Cleaning & Refilling - Halo Triton & Halo G6 Mini Tanks
ECCR Xtra: Clearomizer Tank Cleaning & Refilling - Halo Triton & Halo G6 Mini Tanks
How to Clean & Dry Burn... Kanger ProTank
How to Clean & Dry Burn... Kanger ProTank
Dry Burning Aspire Nautilus BVC Coils
Dry Burning Aspire Nautilus BVC Coils
Dry Hit/Burnt Taste FIX
Dry Hit/Burnt Taste FIX
Technique du Dry burn sur clearomiser (T2)
Technique du Dry burn sur clearomiser (T2)
T3 clearomizer dryburn www.e-cig4u.nl
T3 clearomizer dryburn www.e-cig4u.nl
How to Clean Your Clearomizer and Changing Flavors
How to Clean Your Clearomizer and Changing Flavors
Maintaining the CE4+ Stardust cartomizer
Maintaining the CE4+ Stardust cartomizer
Cleaning your E-cig atomizer using the dry burn method
Cleaning your E-cig atomizer using the dry burn method

Featured Video

How to Make Money Online


How to clean and dry burn a clearomizer