Jordan Mowbray: Do you need the gyro for this to work with the Naza or does the Naza
control the gimbal directly?
RCfly Luzern: Nice video! I use the Tarot Gimbal and have perfect shots. I do aerial
photography in Switzerland with the TBS Discovery. Like and subscribe ;)
Manoela Pires: Hi,
do you use the standard control of phantom one? because i did this
configurations and my gimbal not stop where i want, it only work or full up
or full down angulation.
Cristian Pimimo: I am trying to connect my tarot T-2D to phantom 1, but the gimbal has 2
fixed, blue and yellow lights and no movement. know how to fix it.?
Alejandro Martinoli: for wookong?
Lakelandclub123: My gimbals blue light blinks is that ok?
Petr Sobcak: good
Jamie Andrei: Big thanks Eric (& community) - video helped me just finish the install of
the T2 gimbal and FPV (all works fine now - enabled gimbal on NazaM - super
easy). Tough one is the Tarot software - I have spent days trying to get it
to work - so close - just need to get in to make some minor tweaks.
My Chinglish is not so good (trial and error) - fingers crossed my dodgy
soldering holds up.
Link to the software should anyone need it in the future.
TurboSewerRat: Oh I also had to purchase the tarot FPV cable cause the one I had was to
stubby an hit the tarrot arm preventing full travel down ...
Eric Tremblay: I like to do it but I'm away for work right now making video in Quebec!
Eric Tremblay: You need a little extra space and a bit of foam work good to provide it
Lenny7118: I watched someone else's video besides yours and the person said in order
to mount the gimbal to the phantom you must drill holes underneath the
phantom ? Did you have to do that ?
TurboSewerRat: HEY THANKS I GOT MY SOFTWARE WORKING ON MY TARAOT..I WAS USING THE WRONG
COM PORT..AN TO PUT IN POSIOTION
Eric Tremblay: I'm still on the original version!
Eric Tremblay: Yes as Mazda6b6 said
DScroggins Production: The Tarot runs on 12V power. A 3 cell lipo with work or and 11.1v power
supply. Anything more will require a step down RC BEC adapter
Eric Tremblay: I use a guy on youtube "setup for phantom and t8j", it work you to every
daniel upson: CAn the tarot power out be soldered to the main dji phantom power board and
run of the original battery slot
ll neKo ll: Flyfast, did u turn on the gimbal option on via the naza software to get
the gimbal with manual tilt? Thanks n nice video.
Eric Tremblay: I got many more video coming!
Eric Tremblay: The cable for charging, FPV doesn't come with it. I did received some cable
to plug to the rx but any servo extension can be modified to work.
Eric Tremblay: Thanks!
Kuma Bear: flyfast I just got my Tarot T-2D gimbal. It works awesome! I even got the
tilt working. The only problem I have is that I can't get the USB module to
work. When I hook up the USB module to the computer it says it can't find
artncolors: did u use any stabilization program in post???
AuroraCypher: Once plug into the board you have to power it up, then click open port or
select the right port. Dont use windows 8 with it, also read the manual on
start up carefully. Took me half an hour trying to figure it out but I
finally got it updated.
dennisk905: How do u get version v 1.0 v3 won't connect u should do a video nobody has
yet .. Be the first to sho software downed
Eric Tremblay: Ya, the cable for the gopro is necessary as it is tight in there!
Yos Sie: Hi FlyFast, thank you fro the video! Is there anyway if you make another
which explain step by step in more detail? (Like... what switch did you
assign or any configuration do you have to do @ the Naza Software
configuration)..... or better yet you create another whole video of the
same thing which explain how to control tilt and roll but using the pins on
futaba receiver. Thanks.
AuroraCypher: Hello I cant seems to connect the tarot into the comp... what are the steps
that you do please help !
FishingKakiTV: Sad Face has happen.
Kees groot: Hoi I did what you show in the video, but now my Gimbal is in the Rate Mode
. So i have to stop the gimbal when i let him move. Do you know how i can
get him in the Position Mode , so he stops automaticly? Tanks
stephpar: I'd like to hear about this as well....How did you mount the tarot to the
phantom? Thank you.
Victor Parra: Excelente Video muchas Gracias por tu ayuda.
Eric Tremblay: I know, I usually post the song, but this one slip!
Eric Tremblay: no
Manwhoridemountain: please do it like your name: FLY FAST!!!
FishingKakiTV: This is awesome, thanks for taking the time, BTW what song is this, it's
Eric Tremblay: Thanks!
Eric Tremblay: max 0 min -90 is what I am using. that should work for you!
FishingKakiTV: I replayed it for the song, lol!
TurboSewerRat: Excuse me again lol I'm mean can only be done in Tarrot sorftware !!!
Someone's needs to show this step
upupupupnaway: I've just followed these instructions and they work great. After running
the 2 wires you do need to turn the gimbal on in the naza assistant then
the 7th channel knob adjusts the camera tilt
tag kidlat: I ordered the gimbal. will the extra foam help to not the gimbal touch the
ground? some say's you need to extend the leg.
Eric Tremblay: just watch my other video I made previous to this one, I got photos of the
Eric Tremblay: It add so much when you can tilt it! Now we need to see video!
TurboSewerRat: I DID THE NOB POTENTIOMETER MODIFICATION AN I PUT THE NOB ON THE BACK SO
NICE TO CONTROL PICH ..
Daveys FPV Adventures: Its Adventure Club - Retro City... I've used it in a few of my own vids :D
Stefan C: this Tarot gimbal ist realy good. question in my package there wasn't the
fpv cable included. also missing the cable for 7th channel triggering. was
it included in your package? thx
Little Nellie: Please shows the motor setting screen, thanks.
Tarot T-2D Brushless gimbal tilt set up with Naza/Phantom4.8
out of 5