How To Clean & Dry Burn Kanger EVOD & MT3's




What do you think about this video?

Riazul: i put eliquid in my tank right and i tightened it but then i wanted to put my eliquid in the tank so i tried to untighten the piece put it wont come off i want to put more eliquid inside its really frustrating 

walldoo99 .: Thanks man this is soo cool.I just got some darker liquids that seem to clog the wick in 2 days. this might help. Just a heads up for all the reader. I had been trying to find a price online that was cheaper than my local stores. When you search on GOOGLE try looking for discount e cig liquids and for some reason you fine a much better and cheaper selection.And when I say GOOGLE I don't mean bing or yahoo or any other search engine I mean GOOGLE

Pete Leong: Thanks very much for the removing the extra wicks tip! I was pissed off with mine before I tried that tip and now its much better! Keep up the great work. 

z-KrYpToNiK: how do you clean solid liquid out of the clearomizer,,,, like the liquid froze inside

Tyler Chauffe: This video really helped!!! :D You earned yourself a new sub!

Shawn Elliott: Nice video, I was always wondering how to properly clean these. Though at only $1.13/ea it's arguably worth the trouble to some. I however like to get my full use out of my equipment, which this will help tenfold. This should also help with the Diminishing vapor/flavor problem that these cartos are plagued with. I opened a 4 day old one up after this vid and the buildup was crazy.

ProjectDv2: I did it precisely as you showed, and I gave my flavor wick a gentle press in a paper towel to dry it, and as I opened the paper towel I had fifty billion fibers going in all directions! The goddamn flavor wick unwound itself at the first opportunity. The more I tried to re-wind the fibers, the longer the wick became as the fibers, permanently bent into a corkscrew shape, kept unwinding themselves as I wrapped, slipping out either end. After freaking with it for a solid half hour, the absolute best I could come up with was a damp clump of fibers (the *ONLY* way I could get them to stick together again was to get it damp once more) of roughly the correct length. I just hope I don't end up with goddamn loose fibers floating around my juice now. Totally lame! Others, beware when cleaning your EVOD, and maybe even keep replacement wicks handy!

Keith Cozart: 1:28 that's what she said.

Spyder Seven: Anyone know how to remove the post from the fresh coil design from Kanger? It seems like they want to keep me from getting inside and maintaining it...

Leone Leighton: Does this make the coil last longer and work better?

Sentimental Void: What happens if you don't dry burn it. And you dry it with a blow dryer 

Ash Pathak: Anyone who is not a chain smoking rehabilitator will not literally burn away the coil within week's use. Take it from me. I vape 30 mins a day(actual) on average. Like most people i bought cheap knock off evods to begin with. All coils started giving the burnt taste within the first month. Don't waste your money. This WILL fix it.Specially sweeter juices coils were literally black with gunk. I dry burnt them,then washed them again,then dry burnt them again till you can see the coil back in shining(not literally) metal colour. Good as new now.

Taylor Pleasant: Can you use dry herb in the kangertech evod??? 

PalmTree Moe: Hey great video! How often do you recommend cleaning the coil like that? do i just wait until it starts to taste burnt? Also i bought some replacement heads from Kanger they are the 2.0 ohm for my EVOD glass tank but they look different. It does not have the removable rubber grommet and the wick seems to be internal? I tried to take apart one of those replacements like you did in this video but the center rod doesn't seem to pop off? I'm pretty new to vaping so im hoping i didn't buy the wrong heads. My setup is a EVOD Twist 1000mah and EVOD glass tanks. Also would 3.8v with these replacement 2.0 ohm heads be alright? 3.8v seems to be the sweet spot for me atm. Thanks and sry for all the questions = /

GeorgeH: Thanks for the clear and information video. I'm enjoying my evod tank a lot and a dry burn will save me from having to put in a new coil as frequently.

telefonkirtys: I was trying to fix less vapor problem, but now it feels like I burned it to much and it tastes horrible.

kyuss: Thanks a ton for this video. saved me money!

Ash Pathak: I cant believe i threw away so many coils just because i didnt know how to do this. :( cheers mate. Just revived two burnt heads. Youtube is awesome!!!

UfosAndAliensAreReal: Subd and liked i keep getting watery vapor and no throat hit anymore had the tank for like two weeks and i use a 1100 mah ego c twist battery can you please explain why this happens? I use 50/50 pg/vg and my nicotine level is 12mg. 

Emilio Longoria: I tried this and mine won't make vapor now 

Abraham Gonzalez: Thank you! Fixed my problem!

Anna Voltaire: I'm new to all of this and I found your video incredibly helpful. Thanks for doing these.

ALEX ROQUE: you can just buy a new coil and it would be good as new??

24packman74: You can use replace them cheap so why clean them

Robbie Taylor: ...Great tutorial! Thanks for making this video! Great appreciated from the perspective of an amateur vape'r

Abraham Gonzalez: Thank you! Fixed my problem!

Alex Heasman: Very helpful, thanks!

Nika Rose: is this something I want to d when I buy it?? First day vaping with it and I got nasty burn taste after a few hits

The Puppeteer 777: i bought a mt3 yesterday and i get constant dry hits from it its so annoying how can i fix it or should take it back i cant take the dry hitsive got head ache from it now, i cant use it anymore how can i resolve this problem

Sarah P: Is there a ideal way to store the evod tank? Side laying or upright? should I disconnect it over night from the battery overnight? Also, if you clean your tank like this, does it make it last longer then the ten days before replacement? I bought a kit that did not provide replacements, when I asked to buy some they said they were out of stock, so I need to make mine last till they re stalk.. I also did not get any type of manual or instructions, so I am learning from google. The lady at the desk has only seller experiences.. She did not seem very experienced in maintenance and upkeep. I would like to make the most of my equipment and make it last as long as I can. I see it as a worthy investment. I hope you have a few tips and basic care instructions to make the most of it.. 

Ross Rutledge: Common tap water wich contains all sorts of minerals ect. not good idea use boiled water /distilled pref. dry w/Air.Lots of good tips ask your dealer.Cheers great little vid,still be fine just may lessen life of tank n coil.

Jon Pat: Was very helpful

Bev Pena: This helped alot thank you,keep up with the good work

Steve Boatman: what is the thing you are dry burning the coil with and where can we get one

Travis Rehbein: Five star video!

MrCnqc: wait so you have to clean it every time you change flavors? And what about the small wire (or coil) inside, what do we do with it after one flavor, do we just leave it as it is? do we clean it? replace it? 

Duane Prosser: Thanks! You just saved me a ton of money on my auto insurance. Lol I was told to replace the coil once every one or two weeks but now that I know how to properly clean it, I'll give it a try. Thank you! :)

Preston Beltran: This was so helpful I couldn't figure out how to get rid of that burnt taste I mean I was trying everything and it still had that taste but when I tried this process it got rid of that burnt taste. Thank you so much

Jack Edwards: thanks dude! completely fixed the burning taste, subscribed :)

eric santana: Painful 

317Vapers: No problem, thanks for watching and stay tuned for more!

317Vapers: Every 3-4 days or every 3-4 Fill ups is what I usually go by.

317Vapers: you dont have to do it, you can replace the coil head as much as you want. This is just a little preventative maintenance to help them get more life out of them. Plus its good to know for when your changing flavors etc..

317Vapers: I'm not sure what pen your referring to?

317Vapers: Thanks for watching!

317Vapers: I always give it a good shake as well right after filling it up! helps move the fluid down to the wicks a little quicker

317Vapers: No stupid questions. I do this about every 3-4 days or every 3-4 fill ups. I feel that preventative maintenance will keep the quality up. If you let it get too bad then try to clean it its harder and more stress on the coils! I always say the only stupid question is the one not asked!

JC Paint | Paracord Workz: the evods protanks and protank 2's have same coil just some have short bases and some have long bases. Try keeping the coil head in the base while you try to pop the stem off. if not grab a set of needle nose pliers and wiggle it back and forth till it pops off!

317Vapers: exactly my point. Thanks for watching!

Luke Morter: Those are some beautiful dogs. Thanks for the video

Rating:
How to Clean & Dry Burn Kanger EVOD & MT3's 4.9 out of 5

Shared by Others

How to Clean & Dry Burn Kanger EVOD & MT3's
How to Clean & Dry Burn Kanger EVOD & MT3's
Vapor Lady Lounge Kanger eVod. Protank. MT3. Cleaning and Burning The Atomizer for Better Vaping
Vapor Lady Lounge Kanger eVod. Protank. MT3. Cleaning and Burning The Atomizer for Better Vaping
EVOD Cleaning and Burning The Atomizer for Better Vaping. Protank. MT3.
EVOD Cleaning and Burning The Atomizer for Better Vaping. Protank. MT3.
Kanger EVOD T3 MT3 Bottom Coil Atomizer Rebuild HD Close Up
Kanger EVOD T3 MT3 Bottom Coil Atomizer Rebuild HD Close Up
How to Clean & Dry Burn... Kanger ProTank II & Mini ProTank II. Protank 2 Tutorial
How to Clean & Dry Burn... Kanger ProTank II & Mini ProTank II. Protank 2 Tutorial
Clean Your Atomizer - Protank EVOD MT3 T3 Kanger
Clean Your Atomizer - Protank EVOD MT3 T3 Kanger
Dry Burning Coils & Cleaning Tanks
Dry Burning Coils & Cleaning Tanks
How to Clean & Dry Burn... Kanger ProTank
How to Clean & Dry Burn... Kanger ProTank
How to clean and dry burn a clearomizer
How to clean and dry burn a clearomizer
KANGER MT3 Clearo REVIEW
KANGER MT3 Clearo REVIEW
Cleaning - The New Kanger Dual Coils
Cleaning - The New Kanger Dual Coils
eVod Starter Kit Review   Best eGo Kit for Beginners!    IndoorSmokers
eVod Starter Kit Review Best eGo Kit for Beginners! IndoorSmokers
Kanger EVOD BCC Changable Clearomizer Review from vaporcrave.com
Kanger EVOD BCC Changable Clearomizer Review from vaporcrave.com
Mini Protank VS. Kanger Evod VS. kanger T3
Mini Protank VS. Kanger Evod VS. kanger T3
KANGER EVOD ATOMIZER DRY HIT FIX: TOP WICK REMOVAL
KANGER EVOD ATOMIZER DRY HIT FIX: TOP WICK REMOVAL
Gedanken zum Dryburn
Gedanken zum Dryburn
Kanger Evod 2 Review (Soulvapes Reviews)
Kanger Evod 2 Review (Soulvapes Reviews)
Tutorial - Filling The Kanger EVOD Tank With Dropper Bottle
Tutorial - Filling The Kanger EVOD Tank With Dropper Bottle
Cleaning / Dry Burning iClear 16 Clearomizer / Tank
Cleaning / Dry Burning iClear 16 Clearomizer / Tank
How to Use a Kanger Evod Kit - FlavorPuff.com
How to Use a Kanger Evod Kit - FlavorPuff.com
The Evod by Kanger Bottom Coil Clearomizer
The Evod by Kanger Bottom Coil Clearomizer
How to Clean a Kanger AeroTank - Simple Guide
How to Clean a Kanger AeroTank - Simple Guide
Kanger EVOD Starter Kit Review
Kanger EVOD Starter Kit Review
A PBusardo Review  All About The EVOD - Includes Recoiling
A PBusardo Review All About The EVOD - Includes Recoiling
Kanger T3S & Evod Review
Kanger T3S & Evod Review
Kanger EVOD review
Kanger EVOD review
The Kanger MT3 *REVIEW*
The Kanger MT3 *REVIEW*

Featured Video

How to Make Money Online


How to Clean & Dry Burn Kanger EVOD & MT3's