iwillwait: I've only taken out the slide and now my pistol doesn't fire, even with a
new co2 in it. The hammer strikes but its as if there was no co2
cannister... why is that?
jb428: Man this is a booooring video. The content could have been shown in a tenth
of the time. The guy has no clue how to handle weapons and uses the wrong
tools everywhere. He just seems to like talking about the same things over
and over again.
Jose Valerio: disculpa en que pagina puedo conseguir los repuestos de esta px4 ya que la
mia esta botando el gas
IIIFUZEIII: The reason why the magazines fall out is because the eject button is worn
out. the clip and the catch rub against a lot over time so it wears out and
turn round causing the clip to slide. Widening the whole on the clip will
not fix it. The eject button catch needs to be replaced or somehow altered
to have the square shape it did to make the clip stay. Any ideas on how to
fix this. I have not shot my px4 is a while and id like to find a solution.
Besides buying a new gun.
Gerald Dixon Cummings: My Co2 bottles empty real quick...there's something draining the stuff. Any
fixes? If I don't put a Co2 bottle in and shoot it until its empty, the
bottle drains. WTF???
neonpupils: thanks :)
Dana DP: I am having a problem with my safety keeping the hammer from hitting the
piston. If i push up on the safety it will fire but as soon as i let it go
it will not fire. Any ideas how i can fix this problem?
FUZZ_MUSTARD FUZZ_MUSTARD: What's it shoot
Blazing Phantom: Umarex Customer Service isnt the best, but contact them about an RMA for
Blazing Phantom: Yes I can help, tell me which part of the barrel? what minute of the video
are you stuck on? Are you talking about the actual barrel itself?
EllasIsLife: And how we can take off blowback and increase CO2 release?
Blazing Phantom: Haha No Problem. I received it as a PDA so I will have to email it to you.
I forgot how to skip a line so you might get a few other notifications.
ProfesserNutButter: And how would we do that?
defencekingify: only thing i dont like about the px4 is its large heavy slide, wich takes
more co2 too blowback
Blazing Phantom: Ive shot more than 2000 rounds and still works flawlessly with the only
problem is. that the blowback is pretty strong enough to release the
magazine, not flying out put goes down a bit.
gypsyguessjess: thats crazy my px4 releases the mag to with every shot how can i fix this
Brent Nowell: AWESOME VIDEO! Thanks kid! You just showed me the correct pins to clean the
barrel and lube up the rails for the slide, thanks! Where can I get a parts
diagram for all the parts in this gun?
Blazing Phantom: Check if your magazine falls out when you shoot. If so you can try buying a
new magazine or try my tip. You know the little holes the magazine catch
slides into, use a precision hobby knife and (visual imaging) with the
magazine horizontal with the rotary mag facing up and down, increase the
width of that hole.
Elshad Karbasi: How do you increase the CO2 release.
Dave Campbell: increase on Co2 plz, very interesting stuff here
HARMARSCH2: I need to take my slide off to tighten my rear sites. They were loose out
of the package. I put a piece of electrical tape to keep them from
spinning. But UMAREX says it's a easy fix.
2pacalypse25: my magazine wont even stay in anymore...it used to fall out with every
shot, now it wont even stay inside. how do you know what the magazine
holding slots are and how did you manage to fix this problem?
Blazing Phantom: Yea, a problem that i hate when firing, what I did was make the magazine
holding slots straight through the frame instead of having little pockts
for the magazine catch to fit in but eventually it gets worn down and slips
out. I will try to make another video on what to do so you dont make
mistakes but I cannot do any DIYs at the moment
Manolis Vlazakis: i cant take that small pin that connects with the slide!! any suggestions?
Tugus Mantera: How to upgrade fps px4 storm?
Blazing Phantom: the clip falling out is the downside of the PX4, I have to hold the clip up
with my finger so I can shoot...
Cleadus Fetus: how do you increase the CO2 release and also how do you take off the blow
Blazing Phantom: I will make a more detailed video and cover everything, stay posted and I
will strip it down all the way.
Manolis Vlazakis: how to remove scratches from the px4?
Blazing Phantom: I videoed this at my desk with only my desk lamp turned on to get a good
lighting. Guess wasnt too good.
IIIFUZEIII: Can someone explain to me why the clip easily falls out. Is it the spring
or is it loose. I dont want tk take it apart and end up breaking it.
Tugus Mantera: I like your video but can you make this agains not at the dark room?
Scott Blankley: Can you please email me the schematics for the px4 air pistol as I have
pulled it down completely & am having troubles with the springs etc. when
putting it back together? firstname.lastname@example.org Cheers.
Blazing Phantom: You can ask Umarex Customer Support, my file may be outdated to the new
Blazing Phantom: Yea, if you attempt stripping it and the internal receiver, I can help
which parts need to go in the right places. But mostly you would be seeing
how there are. I also have the Schematics of the PX4 Storm.
ptverhey: dont use a philips screw driver to tap out the pins.. use a punch .. or at
the very least an allen wrench .. something with a FLAT tip not tapered as
you'll be flaring out the pin! and dont use pliers to pull out the pin,
you'll most likely crush or deform it. this is not a intructional video if
anyone is searching for how to properly disassemble their air pistol. ...
only watched a minute or so far. i wonder what other cringing moments the
rest will bring
Blazing Phantom: you can either, extend the barrel length, increase CO2 release, or take off
Gianni Mleczko: Hey when I took my barrel out I didn't notice that the holes on either side
were different sizes. Now I don't know which end to slide in first. Could
you help me out?
Umarex Beretta PX4 Storm Field Strip CO2 Pistol4.6
out of 5