Carlos Krefft: BEWARE: If you purchase this for work and work in a tall building. I
purchased the kayfun on Saturday. It was leak-free all weekend until
Monday, when I went down the elevator from the 45th floor of my office
building. The pressure forced half the tank out into my pockets. Had to go
home and change. The manual mentions leakage when there is abrupt pressure
and temperature changes. Of course I hadn't read it before purchasing so
this is simply a warning to all of you out there. Other than that, I love
this tank it does not leak otherwise.
Harry Rubb3rball: you can fill from the top but, when filling from the top just cover the air
hole with your finger.
Randy Nakoff: Hey Rip, I just bought a Kayfun Lite plus and built a coil on it. The only
problem is that all i get is gurgling and leaks from the air flow hole. Is
there any way i could contact you to get a little help and tips about what
i may be doing wrong?
Bill Allison: I got my first Kayfun a month and a half ago. In short, it changed
EVERYTHING about the way I vape. Once I worked out the kinks and got the
right build I bought another one. And I'll probably get more. The flavor
and vapor production are out of this world and all my other tanks are
gathering dust. Even my beloved Nautilus is sitting in the bottom of my
vape box. Lol. Great video, as always and thank you for doing what you do.
isaias gomez: Will it fit on my nemesis cause right now I have a kanger tech aero tank
Thomas x: Hi I've got the nautilus mini at the moment and I really like but the
kayfun lites seem to be getting a lot of buzz online and was wondering what
the kayfun lite is like compared to the nautilus mini
boof boof: "along the base... and up the shaft"
parabolicpawn: Long as you got that washer thats on the inside pushed into the impression
in the steel your golden (no leaks). I was hardcore on cartos;#1
advocate,but considering the cost,the lack of flavor,and the life span (avg
4-7 days) they are dead to me. RBAs/RDAs all the way. I can spend $20.00
and have a years worth of coil material. CARTOS ARE DEAD.
AnimateReality: OK, I just got mine today (the Plus second batch- It has adjustable air
OMG what a difference. I came from a Kanger Aero Mega and it just blows
that thing out of the water. And I liked my Kanger Aero.
I used Hemp Wick and 28g Kanthal around a 3/32 drill bit and came out with
a1.6Ohm coil. Going to try a few different things like Japanese cotton,
lower resistance etc but even for my very first build EVER, it came out
amazing. And it wasn't that hard to do either.
Anyone considering one of these, YES!!! ITS WORTH IT!!
I was skeptical at first and thought it was over piced hype. But, I
admit... I was very very wrong.
I'm not a fan of the way it fills with the little screw on the bottom but
Oh well. Not a deal breaker. The pros far outwiegh that 1 con IMHO.
I have had issues like you mention in the video with my Kanger. Gurgling
and have to break down to fix it. Usually after a day of vaping it would
I think the Kayfun will pay for itself in time due to the fact you dont
have to buy replacable coil heads, The wire and wicking for rebuilds are
cheap and will last a while.
For what, 20$ or so you get a ton of wire and wicking that will last for a
long time and many rebuilds.
vs 3-5$ per replaceable coil head every week or so.
---OH, And Im using mine on a LavaTube v2.5 @ 5.2V FWIW.
milwaukeemac: How do I contact him. I'd like to see a orchid v2 (kayfun killer) review.
And I can't figure out why my kick worked on my kayfun but won't work on my
Derek J Holak: They should make that plastic tank a Pyrex tank
Martin Bkackham: im a noob and never knew anything about lung hits lol maan you get a big
hit with that technique its too much!
rusko dudesko: On the lung inhale - that's the whole reason you get a mod is for a direct
lung hit - thars the most ridiculous thing I have ever heard
Daniel Nielsen: SICKEST TITS! great video i love how you make your videos, they are not
boring to watch, no bullcrap.. Thank you very much
ST7AM: Real KFL+: Has whistling issues, tight draw for some, one piece center pin.
Hcigar clone: No whistling, AFC goes from tight to very open draw, 2 piece
center pin. Only difference, the Hcigar is a few mm taller, half the
price, but slight quality advantage goes to the real KFL+.
bowmasterable: Hey man will you do a video of you collection b/c i feel like you have a
bunch of builds and i just wana see what you have kept from the videos you
have done i also wana know your favorite build and if you havent already do
a video of the tobh atty
Eddie Kim: Thanks for the video. Just upgraded from a aero tank mega to this and it's
a huggggeeeee upgrade. Tempted to throw my dry hitting aero in the trash.
MikSane: His eyes red from da vape vape ;)
phillip ferguson: Hi I like watching your videos. Had a ? I have a kayfun but it make me
choke every time I take a hit. At 9 w 4.0 v setting u can put my I taste 60
dual coil same setting hit it with no problems. I am using mvp. I have
turned my watts down to 7 and volts to 3.5 it is ok but do not get that big
vape I want. And juice is 18 nic level same juice in both divices. The
kayfun I am using the coils that came with it.
Any advice thank you for reading
Sorry I missed the give away I will looj in to buying the ipv.
Franz Alva: HEY, WHAT CONFIGURATION DO YOU RECOMMEND ME I HAVE THIS KAYFUN LITE, A
TELESCOPE MODE AND AN EFEST BATTERIE 18650, OHH AND KANTHAL 28 GAUGE. I
REALLY BEEN HAVING TROUBLE WITH IT SO ANYONE WHO CAN SUGGEST ME HOW MANY
WRAPS IN THE KANTHAL, I USUALLY DO 6 OR 7 WRAPS BUT I JUST DONT GET THERE
Moe Mozip: whats the nicitine mg you use for lung inhales? curious. thanks
TehMadCat: You can fill it from the top just put your finger on the airhole and put
the top cap on and tip it upside down, then wait a few seconds and you'll
Jamie Sim: u should design ur own atty and make it perfect man
Kai: Too pricey for me.
Van Islandlights: Is building coils and everything else that goes along with rebuildables a
painstaking process? I'd love to have a tank that's... well a TANK in
quality and performance, and that I don't have to always buy new attys for.
I'm just not too sure how hardcore you need to be to get into all that :P
vapeman123: Such a nice review thanks im going to get my kayfun lite asap!!
rusko dudesko: The thing Is tjough your building on a hana so you have to build with high
resistance and turn up the volts so you can have a high wattage
Moe Mozip: whats the nicitine mg you use for lung inhales? curious. thanks
Pazpratodos: Not sure how I got here but after watching this video,( why? still don't
know), I have definitely lost some brain cells... boy, is this a new trend
or something? what a waste of life...
Kolohe Brah: I hate nothing MORE than a company that doesn't take calls. Simply put: it
defines who they are, and where their business will head in the future.
Thanks for the review.
danny kaye: have the k100 would this be any good on this mod thanks keep up the good
Sentimental Void: does this bad boy leak? Can I take it about with me, because thats what I
am looking for!
shttykitty: I just filled it from the top and leaked everywhere just as you were saying
not to do that.. haha
Good to know thanks
tigerfanman: kayfun have the best vape, but no matter what i do they freakin girgle or
flood, i tried everything from holding the airhole flipping it upside down
method, to using the fill hole... nothing works
Maher Hirsh: how many turns have your wire?
Kent Tj: Cant get what is the build of the microcoil on the video? Crazy clouds you
Ryan Seagren: I just purchased this and it arrives thursday. I prefer airy draws and
large vapor production. Im also moving from a Protank 3. Did i make the
right purchase, or should I have gotten the KFL+ or 3.1? I hope this will
Steven Bowen: Sir you have a very nice beard.
Pen Penamora: Does this fit on kamry k100?
Jen Smith: i know im a bit late, but damn what a great review and i agree fully! best
vape ive ever had! just got my kfl+ o fri and im in love!
Kevin Fernandez: Y is it that ur vape clouds look so solid .. They look awesome
Benadict: I've read some reviews that say the Kayfun Lite Plus V2 Clone by EHPro is
just as good if not better, and it's only about 40 bucks. Do you think that
is a biased review or should I go ahead and buy it? This would be my first
RBA and i'm also looking to buy my first mod (vamo v5). Up until now I have
used a standard non adjustable battery with a kanger tech mini which has
lately been failing on me daily. Am I going in the right direction? Also I
use 100% VG juice.
raymond b: Im looking into using rdas and move up from my nautilus is this something
good for a beginner who is looking to take the step into rebuildables
Jonathan Read: 4 ohm, or 0.4?
Dayum Son: Can you put 100vg liquid in this?
Tim Geddes: how high were you? your right, but high..
Jim Newsom: Had an issue with the center pin sheering ,if you don't hold the positive
deck while installing a new coil the deck will move when your tightening
the positive lead down...too many times doing this will fatigue the pin
because it's hollow..
TheSirExile: Does it come usable right out of the box or do I have to make a coil to use
SuperJonjonboy: im trying to find something with good voltage and watage but small that can
be covered up by my hand not worried about my tank i have a aspire nautilus
just need a smaller battery but powerfull
M4RC14N0: Mine leaks out of the adjustable air hole if its open what do I do to fix