Russ Eastburn: Where in Minnesota are you from? I knew you were one of us without seeing
your trailer plates HAHAHA Funny eh? Anyway I don't drive anymore so hard
for me to collect supplies./ If you are close maybe I could talk you into
building me one for my garage.
jan clodd Lafront: smart for smart, filling the insulation with a plastic funne .I would have
cut the tab on the funnel place it upside down and pour the stuff around to
feel the space in between the two pipes. looked like it would have been
faster. or cut of the funnel to get a bigger hole.
NOT A FARM...FARM: You answered almost every question, but why did you only use a small 8"
sleeve over the main 6", wouldn t it be better to have it go from top to
bottom, nice job
426 SUPER BEE: Why don't you guys use a acetylene torch to cut outs on barrel's it's so
much safer and faster My thinking is put 2 valve on the side top and bottom
with a water faucet valves and make a hot water tank heater out of it and a
cooker as well I don't under stand why you would insulate it for if its
a stove heater? Be side a drum life under heat is about 2 yrs b4 it rust
away why they make cast iron IT did work! and it did rocket and sucking
in air like it suppose too. Even tho you had about a 100 bucks in it SO
Carl Huffman: This dude looks like he would be dangerous to be around.
ilililhy1: I built my rocket stove out of a 55 gallon drum, but turn the drum sideways
,long ways and changed the design just a little,works great.i have a five
inch steel hopper to feed the wood, but it really needs about a 8" hopper
to feed the wood.what I do love about rocket stoves is the flue stays quite
cool compared to a normal wood stove,more heat goes into the room,not out
Mike Rafone: Hey thanks for sharing, cool idea...not to be a butt head but safety
glasses man, don't chance it you know.
Feel Good: You should return the garden wagon to Lowes.
Richter Customs: nice big bomber stove
sedrgey tretyakow: американец урод
Tyler Strife: Этот чудило ваще понимает что делает? Снято чудилом для чудил картонных.
David Jastram: Thanks for sharing!
Retire Ug: way! this(it) is мериканский fool
MrCOLTSR2: This is what i love about you tube...ordinary folk uploading videos to help
and inspire other ordinary folk like myself...cheers dude!
Miguel Hernnandez: WEPA, this is some cool stuff to build if you need a heating system.
b532yy: видеоответ печь для бани своими руками - вода не закипит
WingNuts2010: Love watching these DIY videos. But most of them remind me of the Kenny
Everett DIY sketch man Reg.
pawel071174: you remind me of mr Anderson from beavis and butthead demit beavis ill
kick your ass you need some extra air intake for it to fire like real
rocket good luck dude dont hurt your self
W1VLF: Hello thanks for this video and the others in the series. I have watched it
several times. Since you have had it for a year or so can you tell how well
the pipes held up. Did they burn out? I am building one of these
following your instruction
smokescreen36: barrle mold cant be too hard
Wolf Pack: Thanks, it's really nice to watch that work ,, good
smokescreen36: 50 /50 sand and parcel would work better like a cement for diy burners for
molding knifes and stuff
Hans Sifuentes: Mira este vídeo de YouTube:
Andrew Gems: How to you bend the flange to conform to the curvature of the barrel?
Nice dog by the way, is he or she your supervisor?
Very well explained otherwise, and no I was not bored LOL!!
Keeb21: Ding Dang Dooooooo...........
ann nonomous: i just watched a bio-gas video, and i wondered what boosting a rocket stove
with the methane would do? :D
Tony Carothers: lol is this a joke? i cant telll....
imbadwrench: vogelzang makes a 2 drum upgrade kit for $30 or less that has 2 of those
adapters in it
rosie zazzara: How to build stove heater
Danny Fields: To much info very boring.
chefgiovanni: you need to build a
#PIZZA OVEN : http://youtu.be/XYB6I-996Sk
jtjjbannie: I could have sworn that perlite was the same thing as beanbag chair
I guess I was wrong?
Mike Kincaid: Great idea, thanks for the video
redicety12: The one problem with propane tanks is there about 2 to 3 times as thick as
barrels so supposedly they do not work as well, I do not know though
because I have never tried one yet. And yes the high temps also help in
combustion and gassification. I insulated my feed tube/burn chamber just so
I would get a more complete burn and it made a difference.
redicety12: Well I have 9 spares.
Antoine Kerfzhan: why insulate the inner tube if heat dissipation is the goal from the
exterior of the larger barrel? I can see if you cooking with it to focus
the heat to the pot, but if your only heating weigh it (to me anyway) it
makes sense to not insulate the inner tube so you have more dissipating
through out the stove...more or less it isn't need. Let me know your
thoughts. I built a small stove and should have insulated it so the heat
doesn't dissipate but seemingly as a heating device I want dissipation?
redicety12: but about 70+% more efficient.
redicety12: It is a digital camera no exposed mic, even if it did have an exposed mic
it was so windy that day to lose the wind noise would be to lose me talking.
Stephanie Soressi: Dude, I really enjoy watching you work. Thanks for speeding up during
certain spots, that helps a lot.
redicety12: It is really not that hard to get my info, I run a business out of my house
etc. Showing my license plate on youtube videos is the least of my worries.
I actualy though about attempting to edit them out but after thinking about
it decided it was pretty pointless. I am far from anonymous on the web.
Donald Brant: I have seen a video that utilizes a propane bottle and it works great and
you don't need to worry about a barrel burning through after a few years .
As for insulating the updraft pipe I would recommend it because the whole
idea of the Rocket mass stove is MASS , Mass equals heat retention and
better burn efficiency. Happy New Year
qwertyscot: Thnx for the inspiration... I,ve since built a rocket stove heater.. check
out my 2 videos at "qwertyscot"
Loren Klein: WOW! That is AWFUL.....BUT, they are ALL that way....Pay attention when you
by something...they take it back if defective, not when you just change
your mind or take it home to use and hadn't planned on keeping it anyway.
MENARDS is ALWAYS good!
redicety12: Good to know heh, did not have a proper mask at the time I have since
bought one. Also that insulating wrap crap sucks to breath to as I think I
mentioned in the vid.
redicety12: You could do it without the stove kits a few different ways. I just used
them because they were convenient and I already had the one.
redicety12: Thanks will do.
Dem0D1ck: Great project, but a suggestion, if you do this kind of stuff all the time
you better start wearing ear protection man.
Antoine Kerfzhan: I read in a different post that it contributes to gasification of the wood
so it burns the wood more efficiently by keeping the temps in the
combustion chamber very hot...makes sense... I guess comparative to a
catalytic converter in our cars making a cleaner exhaust. Thanks for your
reply I want to build one for my shop and I only want to do it once...know
what I mean! I think I will use propane tanks as they seem pretty well
built and will look pretty good...thanks again!
Bill Last: Great video but of no use to Ausies as one of those barrel stove kit cost
$150 here in AU...If I were to import the kit from the States, it would
cost me about $300! Bummer! Still, a good stove you have there.
redicety12: Glad you liked it, there a ton of fun to build and of course when you get
it working and actually heating an area all the work is rewarded as well.
Holiday: We don\t make alot, but our group do get to travel frequently. Just this year we went to Bangkok to get pictures and their holiday schedules. We are still in a growing phrase so best we can aim for is break even. I think everyone have to overcome the same type of challenge when starting something new. Don\t give up!
Building 6" stove pipe rocket stove heater 55 gallon drum version part 1 of 24.2
out of 5