kent bartley: Question before i get too far... like alot of people here I dropped my
tablet, and now all i get on the screen is a really low dim purple color
from the bottom of the screen. The power is on and volume sounds work,
screen just wont work. I did remove and reseat the display flex like shown
at time 8:43 but its the same.
should i replace just the digitizer screen or the display too? Im
confused because the digitizer just looks like clear glass and my glass
isnt cracked at all.
Roman Carreon: thank you for the video.. my question is is the screen of N8000 and N8013
the same? I just want to be sure before I order.
Novella Grant: gonna change my broken digitizer on my note 10.1.. thank u so much fr this
video..will static be a problem when u do all this.. do ya need any anti
B. Ay.: First I have to say that you have made a great usefull video. You know how
to use this device. So I need your help. Yesterday evening I got a sim card
for my samsung galaxy note 10.1. But my sim card is a bit small. But I
realized that after I had already put the card into the sim-slot. Now I do
not get it back. Could you help me. What should I do. Thanks from Germany
Seuldong Shin: Hi well I have a galaxy note 10.1 actually It's touching sensor is not
working. Actually it is working by s pen but it's not working by hand. So
can you give me some advise? Oh and I bought it in india.
LivingInTheVideoGame: I have a display problem ( the screen display got glitchy) in my note 10.1
after it fell on the floor, and I was told that the display wire might have
gotten loose. which wire is the one responsible for the colors and display?
Billy DeMark: Great video!! My son broke my digitizer and this was a perfect aide to help
me fix it. I bought my screen from repairuniverse as you recommended and I
got the new digitizer in 3 days and had it replaced in under 30 minutes.
Soryuuin: Thanks for making this video. Thorough and easy to understand. My Note 10.1
got dropped today and noticed the display colors got all weird (missing all
dark colors). Reseated one of the ends of the ribbon cable for the display
after I opened it up, and my display is back to normal now.
Abz HTCdesire: Hi. I have a problem with my Galaxy Note 10.1
The screen colours have gone all weird. Greenish purple. And it keeps
flickering. The resolution has gone really rubbish too. Mostly weird colour
and flickering though.
It did drop before it happened and the earphones jack was in at the time.
Wasn't a big drop. Just from bed to carpet. So im not sure if thats what
caused it. Do you have any idea what the problem might be? I've seen other
people mentione the lcd flex cable? Or graphic module? Any help would be
much appreciated. Thanks
nicam49: What superb camera work! Altogether a brilliant and selfless
production....how can you have 65 dislikes??
ismail ghozali: i was opening the back cover of my N-8000, but after that the volume up
button is not respond, but the volume down button is respond, how to solve
i love the video
Mohamed Subeer: Hi
My glass screen is fine but the LCD has bled. Can it be replaced?
Kenny SP: Nice video. At about time 16:40 in video, I noticed that you're using the
screw-driver to rip out or dig out plastic tabs inside. Is that a typical
thing to do?
Bzy Tamihana: hi , i have a problem you might be able to help me with. My samsung tablet
died a while back (no charge indicator on screen), i thought it might be
the charger so i brought a new one, tried to charge it over night but still
no charge or power indicator, nothing! i have tried all the button combos
with no luck. i noticed the dock connector (charging port) is pretty wobbly
and loose when i plug the charger in, do you think that could be the
problem? broken dock connector? or would the battery be dead? thanks!
excellent video by the way :)
Doyle West: what size/type of adhesive tape does this use? i've had to replace both my
frame and screen (two seperate incidents). is it just the 10mm 3m tape as
Andrew Smith: The link to the digitizer says n8000. Will it still work for 8013? Thank
you so much for you time.
Nwe Nee: I want to replace display screen which step I should skip?
delfinio martinez: thanks mr 55.. really good job and appreciate the detail......many people,
VoiceOfAPlayer: Thank you, very very very very much! With your Video I have opened my
Tablet without anything is damaged. I had falling down my Tablet and I
thought it was defect but it was only one cable which slipped out. I think
you make lots of human around the world very happy with your Video! Again -
thank you very much!
I have learned lots of!
ARTHUR gomez: will a n800- screen fit on a n8013 model tablet?
Wayne Berry: Thanks for your response. The one I need is the one that the digitizer on
the n8010 plugs into. If I get the the correct one are they easy to
replace? Also I have put the cable in (without the clip part working) and
now the tablet works perfectly with the s-pen but not with my finger,
could this be due to the possible poor connection or something else?
I really appreciate your help, you are now my number 1 YouTube channel.
myclassyclassic85: The vid is excellent! Going to help me immensely! I am replacing the
motherboard. Less is more for me, so what things do I absolutely need to
remove inside to switch out the motherboard? Cannot find any vid that just
deals with replacing the motherboard. Thank you so much for the info!
Michael Harris: great video, thanks. is it posable to add a sim card port to a 10.1 note.
if so how.
Paul McKell: Hi LE55ONS.
Do you plan on making a video on replacing the cracked digitiser on the
Samsung Galaxy Note 10. 1 2014
Seems the only way to repair this at the moment, is to buy the screen with
the lcd attached.
cinnamongirl3121: Oh and great voice by the way...just saying.
Wayne Berry: Firstly, great video! Iv replaced one digitizer using your video and it
worked perfectly. However, ive come to a second one and im having a
problem. The clip that you "open" and slide the black ribbon conectror
into and then close is damaged. The bit you flick up to open as broken
off, so basically my question is, can I get a replacement? If so what do I
ask for? Any help would be great.
Gianni de bellis: Thank you for this video. I've broken my display, and I'm not very able in
handworks, but I've seen your tutorial and decided to try. I've followed it
step by step and everiting is gone well. I've spent 40 euro instead of 200.
On the other hand, gt n8000 is very vell assembled and is easy to dismoumt
and to remount
Good job !!!
Anderi Cheremskoy: It helped. Thanks.
IzzySpeaks: i would have started it before the back cover was installed. Me and pry
apart covers don't get along. Also i have had several failed connections
when i was installing ribbon tape. Since this new change not one failed
connection. When you used the hot screwdriver i was thinking soldering
cinnamongirl3121: Thank you so much for this. It has to be the all time best on YouTube.
Patty Galloway: This is a great video on the Note 10.1. I had to replace an LCD, on one of
my friends Note. I was afraid, but after watching your video, you made it
look easy. Thank you a lot! I have a question not associated with this
video, but cannot find an answer. Could you tell me how to stop bubbles or
wet spots from getting between the Digitizer and LCD?
YeeHoo Leong: Hi, i got a dead ant trap betweenthe display and digitizer. I notice you
dig out the plastic tab holding the display and remold it later, can i use
glue instead because i dont have the tool. any other alternative? thank
Rana Taher: Hi, iam rana from egypt .thank you for this great vedio. Can you help me
please? My mobile note 10.1 when I put it to charge and do any action on
the internet The battery don't charge .and the charge decrease!!! And if I
want to let the charge increase Idon't open the internet or play any games
while charging and the battery charge will increase but with very low rate.
I change the usb cable but the problem stell present . I gave it to the
unit warranty once before because the battery was off and when I but it to
charge for many hours it don't charge and I tried to open the mobile but I
can't it was a fault to open the mobile before it charge I think I did abug
inside the mobile ,, the warranty put new software , but the problem still
present so l prevent to let the charge reach to zero I afraid I can't
charge the battary as before ,, what can I do ? If I give the mobile to the
warranty again they didn't do any thing here in egypt except changing the
software only ,, that all they can do .do you think the problem is in the
mother board or in the battery or where ,, can you help me? When I ask an
electric technical he said that it is asoftware problem and I should to put
anew sofware again ! But I don't think so ,do you think he is right ?
Please heeeelp me because I'll not give the mobile to any one again
Seuldong Shin: It's n8000
Roman Kultajev: Thanks a lot! I was able to change the screen. You do not have to follow
all of the steps to change the LCD screen only (not the touch screen or
digitizer). Disconnecting battery, screen cables, usb housing and removing
plastic pegs with the screwdriver that keep panels together was enough.
Everything works now!
luacheia99: Hi, first, thanks for the awesome video! you make things to seem simple and
easy. :) You are a great teacher!
My unit warranty finished 2 months ago and 2 weeks ago my n8000 simply
reboot from nowhere and freezed in the samsung logo and didn't turn off the
Samsung said that the problem is in the mainboard and the cost will be
U$320 to fix it.
It is absurd! I am so angry and disappointed... I is not a cheapy generic
Chinese unit, it is a freaking expensive Samsung unit that seems have a
factory defect. Intentional or not, it smells bad business... :/
I tried to reboot the unit with the power and right side sound
button, nothing showed on screen and the unit rebooted to the logo again.
I tried to reboot the unit with the power and left side sound button, the
screen showed a dialog asking me if i wanted to put an alternative rom in
the unit. if i say yes, it shows a dialog saying "Don't turn it
Downloading what, if i didn't set any source?
After watching this video i opened the unit and disconnect all cables and
connected them again to see if it was contact problem. No, it is not,
Nothing changed... :(
I saw on internet a lot of Brazilians S3 units owners entered justice with
a process against Samsung in 2012 and 2013, because a similar problem, that
they called the problem as suddenly death.
So... Samsung screw me!
Can you help me with a info?
Do you know where I can buy the N8000 mainboard?
No place in Brazil has it and i searched all sites that
sell replacement parts and didn't find it?
Thanks in advance for any help or advice.
freezy3056: Hi, my Samsung gt-n8000 10.1 touchscreen is not responding. It only
responds to the s-pen.
So when I touch using my fingers it refuses,
Please assist me
Royce. T: +LE55ONS
DIDN'T U REMOVE THE SIM CARD FROM, THE NOTE 10.1?
& my sim was stuck in my galaxy note 10.1 can remove like yours & i can
take sim out from the note ?
Ahmed Yazan Sbahii: Your king and your doing it's very nice
Francisco Cabascango: Que buen tutorial. Excelente.
Ahmed Yazan Sbahii: Your king and your doing it's very nice
Kris_Smithz: Thank you so much! I replaced the digitizer, and everything worked when I
turned it back on! Could not have done that without this tutorial :)
Chris Jones: Absolutely wonderful! This was such an easy assembly/disassembly to follow,
I didn't put a foot wrong. It's so nice to have my tablet working again
after replacing the LCD screen.
Murugaprakash Balasubramanian: hi!,can i change the metallic body around the display,coz now the paint of
the metallic has gone n it looks bad with white patches
Ibrahim alharbi: u have a great voice :)
nozynoz: Top man, thank you.
Vinicius Silva Tanganeli: Really nice video. I did step by step and my Note is new. Thank you!
Alexandra Doran: hi there i have a samsung tab3,the back camera stoped working so iv put a
new one in but when iv turned it back on the warning sign for the camera is
stil coming on.so i reset it but still i cant get it working.Do you have
any idea what it could be stopping the camera?