Scott T: Shoulda clarified on the two laser screws, now my xbox wont even turn the
freddy marcel: Thank you for helping me.. now my xbox tray is working and I didn't have to
pay for a new one, and spend $30..... Great Video but u should of
made the two laser screw screws a little more detailed, on like which way
to turn it
Yaki Jay Jay: Hey Fetti and Beda I gonna try fixing it to his advice ok I hope it works
TrollTheHackers: Oh thank you! You are a life saver! OMG i can now buy games for once!
nicholas Gasparini: thanks for the info you help me fix my xbox 360 :)
Eddie Murga: Mine still Doesnt work
1969RSCamaro: The 2 screws on the back of the laser are potentiometers and shouldn't be
messed with without knowing what you are doing. They don't actually
increase the power of the laser per say. They control the laser resistance.
Benq and Lite On use the same laser and are notorious for dying. You can
lower the resistance and get some more life out of it. BUT if you lower it
too much, the laser can burn your game disc and kill it. Adjusting them
without a multi meter is a desperation/last option solution.
Ricardo Mendoza: This was REALLY helpfull thx
SpaztasticMoose: The disk drive on my 360 is opening immediately after I close it and I have
been trying to fix it but am having no luck what so ever. Is there any way
to fix it or am I going to need a new drive?
Wow21Jacob: i really need help on this the disc box keeps the tray from making it work
but i need it to play my games any type of advice? anyone? plz?
detective space banana: um y u so mad at him he work hard to help persons
Amplicity: okk .... when ever i put in a disk into my xbox 360 console it would fade
to black as if it were going to play , but then it would disconnect me from
xbox live send me back to the dash board and connect me to xbox live again
.... i also tried it offline and it did the same thing .... please help
lmCIoudz: Are you an idiot? Why wouldn't it?
Thetopmodder: Add InputLime10 if you need help cos this guy don't seem to respond :)
TheRealKidMillie: Your a life saver bro. I cant believe turning one little screw made it work
Pandawatch: how did you disassemble the drive? obviously four screws come out but how
do the ribbon cables come out?
jc deer: I lovvvvvvvvvvvvvvvve u the screw thing worked that just saved me
Darryl J.: I did that but I don't want to do it for every game though.
Zeus Calamity: i tap my xbox mutiple times as it reads the disk and it works.i gotta tap
lightly for about 10 seconds and BAM.
KJJrProductionz: @Iskate1zEro Bring it on ur roof, and through it off... idk XD
Ghosts Cheeto: Thank you someone who knows Wat I'm talking about it plays for 2 minutes
then cuts off thank you
jon st from NOJJON: cool tutorials man, subbed.
KJJrProductionz: @Iskate1zEro yah i don't got a slim..
hiro beefstrip: ive got a ? i had done what u said to do and my xbox stiil wont work the
pot will not spin and it wont even try to read it the pot isnt dead but it
just wont work
undead killer097: what screws do you have to take off of it to get the chip and black casing
Reckless Gaming: buy A NEW ONE
nlkrazycat: my rail on my tray is off theres little pins hold trays in place mine came
Francisco Urenda: Does this work for the elite one too??
aboy31fly: 4toxxxxxx are you saying its stuck open while it's not all put back
MT DEWSKY: Try using the left pot screw. Turn that slightly to the left. The left
controls the games and right is for CD/DVD
yugikid4ever: omg im so freaking hyped right now like can i seriously suck ur pickle omg
godathalowars: yo dude i tightened those littl screws n now when i close my disc tray it
goes like, Bummm BEEEE and just opens back up again, help?
John DeLeo: It always says open tray even if there is a disc in the the disc drive
Michael Zimmer: so what if my laser is burning my CDs, i cant seem to find an answer.
angelina sosa: completely freaking useless
TypeCaliber: my games wont read now... any help???
xX0p7icN1J1aXx: vasiline = sex lube. r u planin on havin sex with ur consel dude, dnt use
vasiline its to runy and will riun ur xboxs motherboard. it did to my arcade
dagbombfilms: @themgmt420 so like the disc would read, you would play, then before it
loads it would disconnect you, than it would connect when you went to the
Justin Fiocca: Thank You Soooooo sk8rnate322: i have a problem when i put a game in it will spin once and tell me open
tray as if there was no game in it
ernesto rodriguez: my way is most simple i just punched it and it works now :)
alec Mileman: Wow thanks it actually reads games now
ZEROXZETAL: Um I dont know anyone who has this Problem but everytime I put my Game Disc
inside the Disc Tray, It Cracks the Inner Glass ring on The Disc and 2 Days
Ago A Big Piece of My Black Ops Broke and now I have to Wait till Black ops
2 comes out ( WHICH I CANT WAIT FOR XD) But Still, PLZ respond back.
Dope INT: Stfu you little bitch
jayson derell: @mike23456789101112 ?
King Kv: Yea it will i used my elite it worked :D
theinfinityshow777: Thank you
SumoPAWNCH: I did this and now my xbox is either stuck on "reading" or its stuck on
"opening" on the block for the disc
Enrique Gonazlez: i tried this it didnt work
Devilman174: yeeeaaaahhhh boy!!!!!!!! U da man ......nice info there, clear cut and to
the point. The tweaking of the eye laser screws the right one i turned
anticlockwise just a little and it worked now it reads disc all the time
.....U R DA MAN....lol
Chef de NYC: Thanks! I'm more info ultrasound type of work. I learn most of the stuff myself online. Just only recently start looking for a school to make things "official". Hehe
Tutorial How To Fix Your Xbox 360 Disk Drive: Open Tray, Laser Now Reading Disks, Stuck Tray4.8
out of 5