Slim Jim: My advice for stringing to save thine hands is to use the included rope
roostering device to pull back the steel cable. Then put the string on. Hook
the rope roostering device on the string just like you would if you were
roostering it. Pull back as hard as you can with both handles in one hand.
Then pull the trigger with the other hand.
Still hard to do but as long as you have some tension on the string to
prevent it from basically dry firing everything should be fine.
AnalExcavator 9000: You were shooting that box from literally about 3/4 yards away, no way was
that 10 yards, my back garden is about 12 yards and is much much bigger
than the distance you shows here.
Ricky Lloyd: Sa.sports fever crossbow is nice.killed a doe at only ten yards.complete
pass through. And got a buck at 23 yards.didn't go through it even with
double lung hit
would shoot 25 yards looses to much power after 20 25 yards.
Steven Lowe: Great video, SASportsxbows. My questions is this to them or any other
experienced crossbow hunter out there....
I bought this from pickle's a couple of years back, it came with 16" bolts. I
can't find any 16" bolts locally and would have to order them from
Crossbowfreaks.com. They are awesome, by the way. I had to purchase limb
tips from them and they were great to deal with.
Since I can't buy 16" bolts, will 20" or 22" bolts work? Since they came
with 16" bolts, and I sighted it in with 16" and practice with 16" bolts, I
am reluctant to use anything longer. If I go with a longer bolt, I assume I
would have to go through the sighting in process again. Right???
Also, does anyone know the weight of the field points that came with the
bolts in the package? Most of, if not all of my broadheads I use with my
compound bow are 100 grain.
Umer Khan: How the heck do you string this? So painful!
Ricky Lloyd: Would not shoot past 25 .not 35 like they say its rated for.arrows OK to
shoot killed to deer with this season. But will get carbon arrows. Factory
one junk after going through a deer even with pass through
Mark Hepp: I just purchase the fever it is a great crossbow,real has power .Was target
practice at my target at 30 yards had target on top of a wash tub,really
old type heavy gauge metal, and 3 foot dia. I shot low the bolt went
completly thur the tub out the backside and 3 foot in the grass. I would
hate to be hit by that at any distance!. Now a question does anyone know a
easy way to replace the tips on the end of the bow limb?? I puchase it was
all ready put together. I dont have the stinging cable like the video
shows. Does any one have a good way to get the string off? Thanks
Austin Woodward: This video was a big help thanks
ed wilkins: ok, so i did the thing where he shows to pull up on the string to release
the tension on the stringing cable. used BOTH HANDS and had someone else
release the trigger. nearly ripped my fingers off. find another way to
release the tension after stringing.
bostonblock74: I just bought it yesterday from pickles sporting good for $150 included
everything im trying too put it together now pickles told me it takes 2days
too put it together and do my scope too have me shooting accurate
MickBurkellc: Very helpful. Thanks!
Jojo Gun Fang: I just got one of these second hand. I collect crossbows I can afford. I
have 10 crossbows. And 4 compound bows I got from people who needed money.
I love the camo on this crossbow.
Anna Comloski: Looks like junk too me,,buy a Wicked Ridge invader,already assembled except
for the riser and quiver,,this looks like a pain in ass to too.Cheap
looking like I said.
dcm44: Can anyone tell me the distance (roughly) each line on on the scope sight
Trawick Stephen: Thanks. Very good Video. I didn't think it was hard but been long long time
since I put one of these together. Very helpful.
Cody reach: You put it on the rail where you put the bolts
Ricky Lloyd: Reason why I say won't trust after 25 yards is.shot a good buck at 30 yards
and double lung hit at got no power to go through deer.only went a inch or
3 at most.
fax701: ciao,ho questo modello ma la skorpion..l'altro giorno camibiando la fune ho
schiacciato il grilletto e ho fatto una specie di dryfire..l'ho fatto con
la fune più lunga,è la stessa cosa che con la fune normale? credi che abbia
danneggiato i flettenti?? la balestra l'ho provata,e va bene e non ci sono
crepe sui flettenti. grazie in anticipo.
tonitchit: Made in china?
sinbad20001: I watched this video prior to assembling the crossbow and it was a pleasant
departure from some experiences I have had with similar projects. This is
one good looking crossbow kit. I hope it shoots as good! Hats off to S A
drewstarr71: He didn't' mention the lube that came with the crossbow.... =-/
Jack Tackett: Has anyone had problems with this? Or know what it's made of? Is it
quality? Any answers would be helpful, thanks!
SA Sports Fever Crossbow Assembly Instructions4.7
out of 5