Pedro Navajas: I can't even get my 2000 f-150 to go into program mode. What the hecks
Grindahz Studio: For a 2003 ford explorer, you have to open the driver door, press the
unlock button and THEN do the on/off 8 times in 10 seconds
Robert Hladik Sr: I have a 2010 crown Vic police car. Is this possible to do this to that
sethw711: I've tried it 10+ times and I get to the part where the locks cycle but
when I hit a button on the remote, nothing happens. It's a 2002 Ford
David Billingsley: I recently bought a 2001 Eddie Bauer Expedition without key fobs. I bought
new fobs from eBay and followed the instructions that came with the fobs,
which is the same as your video. After eight turns on and off, nothing. The
vehicle does not enter the programming mode, however, I do get a
high-pitched chime on the eight turn. Others have mentioned the same.
Anyone solve this problem?
John Weaver III: How come it will go into progrma mood but remote wont program? I know its
not the Remotes Cause i tried them on my dads F-150 they just wont work
with my 2008 F-350
Dj LoCo: Thanks for this video my friend.fix my 2 key remote for my Ford Escape 😊
RCDRIVER9432: Thanks very helpful video :)
GRiND.HARD&STAY.HUMBLE: THANK YOU!! after i changed the battery i was so mad and clueless as to why
my car wouldn't unlock.... after doing it to mine i did it to my sister in
law's car, and it worked also. funny thing tho when i hit the buttons on my
car (pop trunk) it pops her trunk as well!! i don't know why, it really
does but oh well!
dertrom: Electron... does Ford Four Button Keyless Remote is the same procedure?. Is
the same beeper but with four buttons. Thanks!
Heith Gagnon: I had 2 remotes and 1 quite working so I bought another one. I tried this
and it will work for one but not the other remote...I tried numerous
times...Any idea why they wont program together> Great video though...
jbeckertx: Thanks a million!! Worked just as described!! :-)
BMoreGoHard: Wow! I stopped the video at 1:50, walked straight out to my Ford work van
(02' E250 Econoline) It work like a charm. I programed two key fobs in less
than 60 seconds.Thanks a million!
gabriel hernandez: work just fine on my ford explorer 2002 2wd
you can tell me the procedure to program 1 ikeyless remote control for my
toyota sienna 98 xlt
grahamoddities: Took 2 minutes.. wow.. had that FOB for years.. was useless.. and now I
can stop scratching my doors!
BLAZETANGO: Recently bought a 98 expedition. I tried this but didn't work. I found
under steering column an aftermarket alarm remote starter was installed. I
am guessing this is preventing to program the factory keyfob ?
Alex Huerta: I have a 90' F150. Will this work as well? The truck has power locks.
Darlean Craven: now all i need is a new keyfob with electronicr
victoria piscitello: It worked like a CHARM!!
kgbrown247: Heck yes. Thanks bro
kingturgan1: What aboyt FOrd Focus 2000?
steadyc1269: do you want to know something funny, I work at ford, and we still program
several remotes the same way now in 2014. including the police interceptor.
Twofac3 The knowledge: I have a 97 ford expedition and this method works... but after the fifth
turn... hope it works for you guys
Sean M: Thanks for taking the time to post this.
I had an older fob that got a new battery and wanted to add it
It seems that the older fobs might not works with the newer systems.
It came from a truck I traded in and know that it works just not with the
newer. It was from a 95 and did not work with the 02 or the 06
marvin lara: Thanks work up
Henry Rodriguez: Awesome video, thank you, worked.
Brad Lappe: Thanks for posting - worked first time!
chrystal97: With a 2000 taurus I did the ignition 8 times then pushed one button on
each of the three fobs.
Raul Cordova: How program remote control ford focus 2003" I cant ..
Albert Fore: I thought my remote was bad. Thanks for saving me money on a new one.
smacinskyjr: Worked like a charm on my 2010 F 250 lariat! Thanks for your help.
Jorge Banuelos: I have a 2001 explorer sport but I turn switch 8 times but looks don't open
doesn't make noting
Aaron Roush: I have a 2004 Escape with two fobs and when I programmed one the other
would be forgotten. After flipping the ignition 8 times I had to push a
button on fob one then a button on fob two. Just thought in would post if
anybody is having the same issue.
edgar ortiz: Ok I followed the instruction from the late model restoration web site and
it didn't work. So I YouTube it and came up with you site and followed your
instruction. Yes it worked and it was just like your instructor said it
would. All done in 20 seconds. Good job
Anthony Johnson: Thankkkkkkkkkkk you bro for this video and simple instructions.
LaNiceguy: THANKS! Clean, simple, correct video. Great Job! :)
Fletcher Scott: You started with the ignition in the off position and ended with the
ignition in the on position. How can this be on and off 8 times?
Christina Wyatt: Thank you soooo much couldn't figure it out. now it works.
Georgie camron: Please let me start by saying, THANK YOU! SO MUCH!!! I spent the majority
of my day crying. I left my car light on all night, needless to say it was
dead in the AM. It took the tow people four hours and two men to jimmy the
lock. When he jumped my battery,he said I needed a new battery. Went to the
auto store and got a new battery for my car and my keyless. No one at the
Auto store or the tow company knew how to do what you just did in five
minutes. You are a life saver, thank you1
FlutterPwn: I can't get my doors to lock and then unlock. 2001 Mercury Cougar
Jean Luc Picard: I couldn't get the car to program the 2nd remote with this procedure.
...instead of cycling the key switch 8 times the 2nd time...I cycled the
switch 8 times one time...pushed a button on the 1st remote. ..and then the
2nd...turned key back off ...it worked. ..2002 Mustang
Ranssel Soto: Grasias!!
Dillon Hunt: Thanks for this video.
MrJudge33: i just bought my first ford,2006 f150 stx.it has no power windows or
locks.i'm installing universal windows.i noticed that i have wires going to
the actuator lock.the dealer that i bought truck from said they deactivated
alarm because it would activate randomly,i am wondering ,did this model
come with keyless remote even though i dont have lock switch on door panel
and will one of the keyless remotes work on this truck?
FranchiseSIX5: I have a 99 Explorer. I tried turning it 8X on and off with no success. I
saw your variation about locking and unlocking the door manually, (using
the door switch) as you get in the vehicle, and repeated the 8X step. It
worked like a charm! I would recommend that people do that unlock/lock
manually trick if you're having problems, regardless of year and model.
charlie brown: whats the keyless entury code for 1999 for f150 ext cab
lancebasspop: course i know i got lucky and not all ppl may be as lucky
DELTATWO4: well done man that was so helpful for me
Semsem Khodeir: Thank you, it worked perfectly on my 2002 ford explorer
xXArcherXx: Thank you so much for this video!!! Saved me over $50 at dealership!!!!
Program Keyless Entry Remote Ford 1995-20084.6
out of 5