How To Program Keyless Remote For GM Trucks And SUVs - FREE




What do you think about this video?

carandtruckremotes: Unfortunately, there are no do it yourself instructions that will work for the 06 Malibu. You will have to take that remote to a GM dealer or locksmith to be programmed with the diagnostic tool.

omar Santa: Will this work on a 2006 Equinox 

Henry Ramos: Needed to reprogram the factory keyless entry on 2000 Yukon. Thank, programmed perfectly.

David Schimpf: Will this work for an 03 Malibu?

Joe Rainey: Its 3 degrees in STL, I need to know if it works for my 2007 H3 Hummer before I go into the garage. Thx.

Luis Castillo: Dude, thanks, I have a chevy trailblazer, the main remote wasnt working, fixed it immediately. The mechanic guy didnt even know what he was doing in the first place, he was already telling me that i needed to buy a new remote... Again, Thanks.

David Abella: Hello, Will this work for a chevy Colorado 2009?

David Emerling: Would this programming procedure work for 2004 GMC Yukon?

Jose gonzalez: Can you help me please i buy another beeper i can you help program is a Daewoo lanos 1998

Russell Parker: Although this is good information this procedure will not work for Hummer as stated in the video. It either has to be reprogrammed thru the dealership or thru a locksmith or mechanic that has the programmer the plugs into the vehicle.

Aaron Uzumaki: works for a 2008 pontiac G5?

nvg80: How do you program a remote on a pontiac g6 2006? Please I need help 

Nhorbien Dizon: Is it working on Chevrolett Aveo 2008 edition?

AIA: Would this work on a hummer h3 2006 I couldn't get it to work 

Rhonda Sweet: Will this work for a 2007 HHR? 

True Vision South, LLC.: Tried programming following your instructions on a 2008 Chevy Uplander, unfortunately it didn't work.. Before I tried programming, both remotes panic buttons work. So this is why I tried to reprogram, I even changed batteries on both remotes. Im truly need some help as I'm not trying to pay the dealer to reprogram..... Anu advice would be really appreciated...

Isaac Aaron: Worked the first time on my 06 Chevrolet Tahoe. And I'm not tech savvy but I actually did it correctly. 

Anthony Rivera: Will this work for a 01 chevy cavalier z24 ?

Mike Perry: Here is what worked for my 2003 Buick Rendezvous CX. IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again. 1. Close the vehicle doors. 2. Insert key in ignition and turn to ON (As far as you can without cranking engine) 3. Turn ignition OFF and remove the key from the ignition. 4. Press and hold the driver side door lock switch in the UNLOCK position and don’t let go until step 8. 5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.) 7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder. 8. Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated. 9. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed (this take approximately 15 seconds). 10. Repeat step 9 for each transmitter you want to program including your existing working remotes. You can program up to four remotes. 11. Remove the ignition key in order to exit the Program Mode.

Michael Smith: Will this work for a 1998 Chevy K1500 Silverado Z71?

David Yacoub: Do you think this will work on a 2008 Chevrolet Uplander?

Lito Bhoy: how about Hummer H3 i lose both remote :-{

Mark B: No luck so far getting this to work on a 2003 Oldsmobile Aurora. Anyone know for sure if it works on Oldsmobiles and Cadillacs with memory seats?

Clayton Cates: okay I have a 2003 chevy Silverado ext cab ls z71 so this should work for my truck I have tried this procedure over and over and it still doesn't work I have replaced the battery and have checked to make sure my transmitter works at one of the lil testers they have at autozone so the transmitter is working , its just not syncing with the truck any suggestions.

kenneth almas: Hi, this didn't work on my 01 Tahoe. After i had held down the the button and turned on and off the ignition 2 times, and released the button, nothing happened. the doors didn't lock and unlocked like in the video? In other words, couldn't get in the programming mode for the remotes.. Is there another way?

Sean Chandler: THX WORKS PERFECTLY

James Leggett: I have an 08 chevy equinox with remote start..will this procedure also work for the remote start as well

Whitney K: Awesome Sir!!! Thank you very much for this video. Programmed a Grand Am remote to work on my '03 S-10 (so what if it has a trunk button, lol)

Al Pomey: This worked for me. 2001 Silverado. Thanks.

cody johnson: how do you do a kia spectra ex 2006

IgOtTaDaChShUnD: Will this work for a 2006 chevy hhr?

jay mack: Thanks alot , I bought this remote on Amazon for $20 and i watched this video and it took me 5Mins and i did it after one year without keyless entry . After all this time .Thanks again

Erick Ochoa: Thank you for your help 

Stefan Hofer: will this work for HUMMER H3? thanks a lot for answering

SuperSoto81: Tanks man for u help good video

ucantkeepup583: +gary withrow what you're saying sounds like an electrical/parts problems... For the side mirrors; If I understand you correctly you're saying that when you try to adjust them from INSIDE the truck using the directional pad the mirrors will only go left/right but not up/down? Solution- These model Trucks/SUV's are notorious for doing this & this most often has to do with the motor inside the side mirrors. IMHO the best, easiest & cheapest way to fix this is to go to a vehicle junk/scrap yard & find your model vehicle (or one similar with the same side mirrors) that's been totaled & just purchase the side mirrors & replace them. Just purchase 1 at first, install it on your truck & see if that fixes the problem. That should do it, if it DOESN'T there may be a short in the wiring harness. As far as the drivers side door not unlocking more than likely has to do with the lock/unlock electric motor/actuator inside the door panel. Does this only happen when you're using the key fob? Or does it not unlock from the inside either when you press the unlock button? Hope this helps!

Martin Arzola: Thnxs man ,, this did work ,,, I'm a 13 year old and know how to do this,, did it for my parents truck

gary withrow: I got a 2001 Silverado the doors lock but the drivers door wont unlock and the mirrors go left and right but not up and down like to no what is wrong !

Michael Alvarez: you just save me $100 dollars from the dealership,I even offer them cash payment for lower price n they refuse it ,good for me, it cost me$0 dollars thanks to u.

Rashad Thompson: Hey I have a 2006 buick lacrosse cxl ??

Rashad Thompson: Hey I have a 2006 buick lacrosse cxl ??

Sam Snead: Thanks

Vidal López Bravo: Hello, how can I program spare comtrol for my Hummer H3 2007?

Rhoda Longmire: I have a 2008 Trailblazer that has power door locks but the dealer only had a key. Does

carandtruckremotes: Not all the remotes are interchangable. Please email us the details so that we can help. Go to carandtruckremote com and click on contact us

carandtruckremotes: You're welcome Paul. Glad we could help.

carandtruckremotes: It should work for the 2001 GMC Yukon factory installed keyless system. There may be something wrong with your remote or your keyless system.

cindyclarinet: does not work on 2005 Colorado

Schools: Learn how to get phlebotomy training in California! The job pays decent money for the amount of schools needed to graduate.
Rating:
How to Program Keyless Remote for GM trucks and SUVs - FREE 4.5 out of 5

Shared by Others

How to Program Keyless Remote for GM trucks and SUVs - FREE
How to Program Keyless Remote for GM trucks and SUVs - FREE
How To: Program GM Silverado Sierra Keyless Remote Transmitter
How To: Program GM Silverado Sierra Keyless Remote Transmitter
Program keyless entry remote for GM / Chevrolet / GMC1998-2006
Program keyless entry remote for GM / Chevrolet / GMC1998-2006
How to Program a GM Keyless Entry Remote Key Fob LHJ011
How to Program a GM Keyless Entry Remote Key Fob LHJ011
Free Caddy. Chevy. GMC. Buick Keyless Keyfob Remote Programming 2007 and up.wmv
Free Caddy. Chevy. GMC. Buick Keyless Keyfob Remote Programming 2007 and up.wmv
HOW TO PROGRAM A FORD F150 RANGER EXPLORER KEYLESS ENTRY REMOTE
HOW TO PROGRAM A FORD F150 RANGER EXPLORER KEYLESS ENTRY REMOTE
GM REMOTE PROGRAM VIDEO.MOV
GM REMOTE PROGRAM VIDEO.MOV
Keyless Entry Remote Programming
Keyless Entry Remote Programming
programming a remote for keyless entry on a 1997 chevy truck
programming a remote for keyless entry on a 1997 chevy truck
Dorman - GM Keyless Remote Programming
Dorman - GM Keyless Remote Programming
Keyless Entry Problem / Solution (GM Key Fob 22733524)
Keyless Entry Problem / Solution (GM Key Fob 22733524)
How to program the keyless remote on Ford Expedition . Lincoln Navigator.
How to program the keyless remote on Ford Expedition . Lincoln Navigator.
GMC Acadia Remote Keyless Entry
GMC Acadia Remote Keyless Entry
GM Remote Repair Keyless FOB Fix - Keylessfix Button Repair
GM Remote Repair Keyless FOB Fix - Keylessfix Button Repair
For Sale 2007 GMC Yukon XL Denali Dallas Texas
For Sale 2007 GMC Yukon XL Denali Dallas Texas

Featured Video

How to Make Money Online


How to Program Keyless Remote for GM trucks and SUVs - FREE