nitrorcx: There's no real need to mix your own nitro fuel because most places that do
sell nitro fuel it's already premixed.
DjBeats80: Would I be able to put that fuel mixture in my Traxxas Rustler 2.5 engine?
firework bug 02: um what gas do you use for a redcat racing monsoon truggy
Leonard Beaumont: Nice
Jordan Clune: @nitroRCX
Jordan Clune: Thankyou nitrorcx what about a beginner nitro rc car
Jordan Clune: @nitroRCX
Garrison McCarthy: Can you use that fuel for any nitro rc car
Tsukune Aono: Are u alowed to use a octane booster?
Jordan Clune: Can you please do a make a video on how to mix 1/8th scale nitro fuel
please :) thankyou
nitrorcx: @TheCjcoon The 1/5th models will go about 40+mph. Noted I will let Bobby
know to make more videos for the 1/5th scales.
nitrorcx: @TheCjcoon You will need to break in the engine yourself, all of our 1/5
gas cars will come with the fail safe. The antenna is pretty short it's
just that the antenna tube was put on and wasn't cut to length before the
video was made.
mememojo: Is it true that the higher the octane level the less flamable the fuel will
theKOchannel: How the freak could 110 octane damage the motor? All octane does it prevent
it from pre-detonating, which could crack / blow your piston apart. The
higher compression you have, the higher octane you need.
marshad2007: can you show us same sand wheels for the BARCA ?
nitrorcx: @rcnightmare Thank you for the feedback, RCNightmare, we really appreciate
ERIK1996x: how do you mix the fuel for the 1/8 series ?
Luke Meharry: What ratio of nitromethane methanol and oil do you suggest for a .18 1/10
nitrocar usaily running about 18% nitro mix? Please reply!!! Thankyou
TheCjcoon: @nitrorcx cool thanks can't what to see them
patrofutbol: i dont understand anything
Shane Miller: Thank you Bobby I been looking for a good video on everything you said
spencer4211: i am new at this hobby this buggy comes with a 30cc engine. i was wondering
would a 38cc engine be any stronger?
nitrorcx: No this only applies to our 1/5th scale gas powered vehicles.
James Balagtas: is this gasser? hope you have nitro mix on youtube
nitrorcx: No this isn't the fuel you use on vehicles with nitro engines, go to your
local hobby shop they will have the nitro fuel.
hotrodking99: What car is that??
nitrorcx: @joseperron123 No you cannot, your suppose to use 20% nitro fuel on the
Aking Moe: hello bro... i just want to ask you about how to make nitro fuel for RC
nitro trucks 1/8 scale.] cause in my country is very hard to get nitro
fuel. thanks nitro rcx
kdknitro: @mememojo that is very true about lower octane fuels, they can combuster if
you have high compression which will destroy a motor if it fires while the
piston is on is compression stroke. its like the piston hiting a wall.
Higher octane is made to stop predetonation it can be compressed to alot
higher pressures without acting like a diesel and just igniting under high
compression. Mainly if you have a turbo or supercharger that forces air
into your motor you can use better gas to stop it
baseballplaya103: thank you, that was very helpful!
MrRCking84: what if i have a full 4ltr gallon.. so what would be the mixture... if i
dont have that sqeezy bottle... in 1 full gallon can i put half bottle of 2
stroke oil or more?
kdknitro: Im talking about very high compresion motors you dipcrap, you get your
facts straight and learn more about fuels and what goes into making them
work in certain aplications. Just cause you can type doesnt mean your right
and make stuff up.
nitrorcx: We always brought the premixed nitro fuel so we won't be able to tell you
how to mix the fuel.
Hotbun011: How much does it cost?
Naturepheonix: ALso for ratios, if your car is above 30+ cc's, it's good to run it at 25:1
along with 40-50 cc engines (Not rc related), but UNDER 30 cc is fine to
run at 50:1, also if there is too much fumes on the 30+ cc ones it's best
to run it at 32:1 ratio. 90+ octane should be fine.
TheCjcoon: are the buggies pre breakin from factory or do i hafto break it in and dose
all 1/5 scales on your site have fail safe? prity long entena for 2.4 ghz
joseperron123: can you use it for the hyper speed
Tonanho1: Hello, What if i use 95 octan gasoline? because in my country i can't find
93 octan. Is it dangerous for engine?
Austin Bishop: would 110octane work or harm the motor i was just wondering becuase it
readily available in my area and dont want to burn the motor up?
Jonathan Oxlade: 87% octane is normal unleaded so thats what i can ownly get where i live
and if cars run on 87% then so can a weed wacker engine can because petrol
cars can run on any octane level but 87% is cheaper but it still does its
Luke Meharry: its okay i have figured it out any but thankyou anyway
Christian Zega: how fast does 30cc barca go at high speed at full throtle
Naturepheonix: Guysm use Mineral type oil for breaking in and FULL - synthetic for running
(Ensure high temp lubrication) NEVER NEVER NEVER! use marine oil, that's a
total different oil for low rev but high torque engines. Any brand is fine.
If you do this, it'll ensure your engine to serve you as much as you served
it. Oils can usually be differentiated between mineral and synthetic by
color. Black (The one he used) is usually mineral, yellow or brown/gold
should be synthetic.
Irvin Polanco: hello... I lost that lil thing to choke the RC and I can find A new one.
please any info let me now
Barb Stuit: does this work on nitro trucks like the mad code , I really need to know
Xx408cXx: Your video was really helpful bc I'm just about to buy my baja but I have a
question about the 2 cycle oil! Can you use any 2cycle oil or no? Thanks
nitrorcx: There is a kill switch right by the pull start, you push the button and
it's shut the engine off.
flavio rodriguez: how do u brake in a engine like this i have a 22 cc engine and would like
to know how to brake it in
Ali Suliaman: Do u guys know the name of this car and what is the spped of it using the
oil and gasoline fuel1:25 per hour, and how much fuel does it use per